2
Contents
Introduction - 3
Obtaining Pagers for your Paging System - 5
Paging System Operation - 6
Paging System Installation - 7
Trouble Shooting - 8
Appendix A – TAP Interface Specifications - 10
Appendix B – DIP Switch Settings - 14
Appendix C – TAP Checksum Calculation - 15
Appendix D – TAP Response Codes - 16
Appendix E – Extended ID Processing - 17
Appendix F – Embedded Control Characters - 18
Appendix G – WaveWare Interface Specifications - 19
Appendix H – COMP1 Interface Specifications - 26
Appendix I – COMP2 Interface Specifications - 27
Appendix J - Timed Messaging Function - 29
Appendix K - Contact Monitoring Function – 30
Appendix L – Connectors and Indicators - 31
Warranty:
WaveWare Technologies, Inc. warrants this equipment to operate properly for a period of one year from
date of shipment from WaveWare Technologies, Inc. offices, including parts and WaveWare factory labor, but not
including shipping. The warranty becomes void if the equipment is physically damaged by external events.
Disclaimer:
This equipment has not been designed to operate as a primary means of life/safety communications,
and should only be used as a secondary means of communications. The nature of radio paging is such that alert
messages are not guaranteed to be delivered to pagers, due to a variety of causes, some of which are out of the
control of the equipment manufacturer and the user of the equipment. The WaveWare paging equipment uses a
one-way radio paging protocol called POCSAG, which relies upon proper operating frequency coordination and
licensing, proper external environmental conditions, and proper equipment maintenance, in order to deliver
messages to pagers in a reasonably reliable manner. WaveWare Technologies, Inc. is not liable for damages caused
by failure of delivery of messages from WaveWare equipment to pagers, beyond the normal warranted equipment
repair or replacement during the warranty period.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. Changes or
modifications to the equipment not expressly approved by WaveWare Technologies, Inc. could void the user’s
authority to operate the equipment.
Site Licensing:
This equipment requires a site license from the FCC in order to be operated. The site licensing can
be obtained through several means, including Shared-Use Site Licensing from WaveWare, FCC Site Licensing
through WaveWare, directly from FCC licensed Frequency Coordination agencies, or from anyone that can help
you fill out the proper FCC forms payment submittal requirements.
