background image

 

Page 7 of 59

 

 

Warranty and Other Information 

 

Warranty: 

WaveWare Technologies, Inc. warrants this equipment to operate properly for a period of one year 

from date of shipment from WaveWare Technologies, Inc. 

Warranty includes parts and WaveWare factory labor, 

but does not include shipping charges. The warranty becomes void if the equipment is physically damaged by 
any external events. 

 

Disclaimer: This equipment has not been designed to operate as a primary means of life/safety communications, 
and should only be used as a secondary means of communications. The nature of radio paging is such that alert 
messages are not guaranteed to be delivered to pagers, due to a variety of causes, some of which are out of the 
control of the equipment manufacturer and the user of the equipment. The WaveWare paging equipment uses a 
one-way radio paging protocol called 

POCSAG

, which relies upon proper operating frequency coordination and 

licensing, proper external environmental conditions, and proper equipment maintenance, in order to deliver 
messages to pagers in a reasonably reliable manner. 

WaveWare Technologies, Inc. is not liable for damages 

caused by failure of delivery of messages from WaveWare equipment to pagers, beyond the normal warranted 
equipment repair or replacement during the warranty period.

 

 

Note: This equipment has been tested and found to comply with the limits for a “Class A” digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and 
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to 
cause harmful interference in which case the user will be required to correct the interference at “His Own 
Expense”. 

Changes or modifications to the equipment not expressly approved in writing by WaveWare 

Technologies, Inc. could void the user’s authority to operate the equipment and void the warranty.

 

 

Site Licensing: This equipment, when attached to a radio transmitter, requires a site license from the FCC in 
order to be operated. The site licensing can be obtained through several means, including 

Shared-Use Site 

Licensing from WaveWare, FCC Site Licensing through WaveWare

, directly from FCC licensed Frequency 

Coordination agencies, or from anyone that can help you fill out the proper FCC forms payment submittal 
requirements.

 

 
 

Other Information 

 

Versions of the Encoder Programming Software 
 

The 

Version

 number of the Paging System is written on the 

Front Cover

 of the 

Paging System. 

 

The v

Encoder Programming Software is 

ONLY

 for the 

SPS-5 v8

 Paging System is not compatible with any other 

encoder board version. 
 
The v7 Encoder Programming Software is 

ONLY

 for the SPS-5 v7 Paging System is not compatible with any other 

encoder board version. 
 
The older 4, 5 and 6 versions are written on an EEPROM Chip on the Encoder Board inside the paging system. 
 
The v6

 

Encoder Programming Software is for the SPS-5 v6 Paging System, but should be compatible with some 

of the v4 and v5 versions of the older Encoder Boards. 

 

All Encoder Programming Software for versions 8, 7 and 6 are available on the WaveWare Website at:  

http://www.wirelessmessaging.com/SPS-5_Software.html

 

 

 

Содержание SPS-5




























































Отзывы: