Page 18 of 59
On the Main Screen of Encoder Setup Program, Click on the “Settings” Icon to Open the Predefined Messages
Screen.
Below See Fig. 13
Fig. 13 (Settings Icon)
Below are the “Encoder Settings” screen for the Com Ports and Protocols.
NOTE: Defaults are shown below. Fig. 14
When Finished, Click
“OK”.
Encoder Settings:
A:
Protocol for the Com Port
Choices are TAP, PET and TAP, COMP1, COMP2,
WaveWare and Scope.
B:
Settings for the Com Port
Choices are Verbose or Non-Verbose and Baud
Rates of 300, 1200, 2400 and 9600 with Connection
Settings of N 8, E 7 or 0 7.
C:
Restore Defaults Button
Click on this Button to “Restore” Settings to
Factory Defaults.
D:
Advanced Encoder Settings Button
Click on this Button to open the “Advanced Encoder
Settings Screen for more Options. See next page.
Fig. 14 (Factory Defaults Shown)
The “Advanced Settings” Button will give you more Options.
The “Advance Settings” Screen is next:
