Wavetek Wandel Goltermann CLI-1450, Руководство по эксплуатации

Страница: 75 / 102

2-32
T i p T i p
T i p T i p
T i p
You can resave an Installation file by pressing the SHIFT + keys.
This allows you to change the name of the file.
VIEWING SCAN FILES VIEWING SCAN FILES
VIEWING SCAN FILES VIEWING SCAN FILES
VIEWING SCAN FILES
There are three types of scans that you can store and view — full
scans, six-channel scans and tilt measurements. The type of scan
depends on which screen you are in when you store the file. Once the
scan is stored, you cannot change its type.
T i p T i p
T i p T i p
T i p
You can tell what type of scan you have selected in the directory
without having to view it. Just look at the icon in the upper right-hand
portion of the screen directly below the title bar:
FULL SCAN
SIX-CHANNEL SCAN
TILT MEASUREMENT
You view Scan files using the same screen in which the file was stored.
For example, the following screen is used to view full scan files:
Important Important Important Important Important
When viewing a Scan file, you can adjust the screen settings the same
as when you are viewing a “live” measurement. These settings are
described earlier in this manual.