Wavetek Wandel Goltermann CLI-1450 Скачать руководство пользователя страница 3

Wavetek Wandel Goltermann warrants that all Products manufactured or procured by Wavetek
Wandel Goltermann conform to Wavetek Wandel Goltermann's published specifications and are
free from defects in materials and workmanship for a period of one (1) year from the date of delivery
to  the  original  Buyer,  when  used  under  normal  operating  conditions  and    within  the  service
conditions for which they were designed. This warranty is not transferrable and does not apply
to used or demonstration products.

The obligation of Wavetek Wandel Goltermann arising from a Warranty claim shall be limited to
repairing, or at its option, replacing without charge, any assembly or component (except batteries)
which in Wavetek Wandel Goltermann's  sole opinion proves to be defective within the scope
of the Warranty. In the event Wavetek is not able to modify, repair or replace nonconforming
defective parts or components to a condition as warranted within a reasonable time after receipt
thereof, Buyers shall receive credit in the amount of the original invoiced price of the product.

Wavetek Wandel Goltermann must be notified in writing of the defect or nonconformity within
the Warranty period and the affected Product returned to Wavetek Wandel Goltermann's factory,
designated Service Provider, or Authorized Service Center within thirty (30) days after discovery
of such defect or nonconformity. Buyer shall prepay shipping charges and insurance for Products
returned to Wavetek Wandel Goltermann or its designated Service Provider for warranty service.
Wavetek Wandel Goltermann or its designated Service Provider shall pay costs for return of Products
to  Buyer.

Wavetek Wandel Goltermann shall have no responsibility for any defect or damage caused by
improper storage, improper installation, unauthorized modification, misuse, neglect, inadequate
maintenance, accident or for any Product which has been repaired or altered by anyone other than
Wavetek Wandel Goltermann or its authorized representative or not in accordance with instructions
furnished by Wavetek Wandel Goltermann.

The Warranty described above is Buyer’s sole and exclusive remedy and no other warranty, whether
written or oral, expressed or implied by statute or course of dealing shall apply. Wavetek  Wandel
Goltermann  specifically  disclaims  the  implied  warranties  of  merchantability  and  fitness  for  a
particular purpose. No statement, representation, agreement, or understanding, oral or written,
made by an agent, distributor, or employee of Wavetek Wandel Goltermann, which is not contained
in the foregoing Warranty will be binding upon Wavetek Wandel Goltermann, unless made in
writing and executed by an authorized representative of Wavetek Wandel Goltermann. Under no
circumstances  shall  Wavetek  Wandel  Goltermann  be  liable  for  any  direct,  indirect,  special,
incidental,  or  consequential  damages,  expenses,  or  losses,  including  loss  of  profits,  based  on
contract, tort, or any other legal theory.

Extended Warranty Programs

Extended Warranty Programs

Extended Warranty Programs

Extended Warranty Programs

Extended Warranty Programs

Extended warranties and service contracts are available for new and currently owned
equipment for an additional cost. Contact the Customer Service Department (800 851-1198)
for details pertaining to extended warranties and service contracts.

Return Authorization Procedure

Return Authorization Procedure

Return Authorization Procedure

Return Authorization Procedure

Return Authorization Procedure

The customer MUST obtain a RETURN AUTHORIZATION NUMBER from the
Customer Service Department (800 851-1198) prior to returning any equipment for warranty or
non-warranty repair.  Wavetek accepts no liability for any instrument or subassembly returned
to the factory without this number.  Any correspondence regarding returned instruments or
subassemblies  should  be  referenced  to  that  number.

WARRANTY

Содержание CLI-1450







































































































Отзывы: