Installation -
Installation Using Mount Bolt & Nut
11
1
Using the template sheet, make and drill the cabling
holes on the wall/ceiling.
2
Secure the two long mounting screws to the camera’s
base.
3
Pass the wires through the mount bracket and make
all necessary connections.
4
Mount the camera to the mounting surface by using the
2 mounting nuts. Rotate the locking discs over the screws
until the camera is held tightly from the mounting surface.
5
Secure the camera’s cover dome onto the camera base
to complete the installation.
6
Detach the protection film from the dome cover.
