Installation -
Installation Using Mount Plate
10
Template Sheet
1
Detach the camera’s cover dome from the camera’s
module by unscrewing the three cover dome screws.
2
Using the metal mount plate, mark and drill the necessary
holes in the wall or ceiling.
3
Connect the network cable and power cable respectively.
See the section 'Installation - Cabling' for details.
Insert the Lan cable into the rubber first as (a) below.
Put the Lan cable into (b), then (c) will be assembled to
(b) tightly. As a final step, (d) need to be assembled to (c)
without making any space.
4
Using the three (3) included screws, mount and secure
the camera to the wall or ceiling.
5
Attach the camera base to the metal mount by snapping it
into place using the two metal handles.
6
Secure the camera’s cover dome onto the camera base
to complete the installation.
7
Detach the protection film from the dome cover.
6
7
5
4
3
2
b
c
d
a
