8
Installation -
Installation
Before installing your camera, you have to read the following cautions.
1. You have to check whether the location can bear five times of the weight of your camera.
2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged.
Otherwise it may cause a breakdown or fire.
3. When installing your camera, don’t allow any person to approach the installation site. If you have any valuable things under the
place, move them away.
1
Using the Template sheet, make the cabling hole on the
wall/ceiling.
2
Connect the network cable, power cable respectively.
See the section ‘Installation - Cabling’ for details.
3
Fix the camera on the wall/ceiling by screw provided.
Loosen the Pan/Tilt stoper screw a litte before fixing the
camera.
4
By using the test video cable, check the screen during
installation.
Desi-Pak (Moisture Absorber)
When installing, unseal the vacuum-packed Desi-Pak and
install it in the marked position.
When inserting or removing Desi-Pak, be careful as it may
be torn if you use a pointed tool.
Reset to the Factory Default
Press the reset button for 5 seconds to return the setup
to the factory default.
Warning :
If you press the ‘Reset’ button, you will lose all setting
data. If needed, please, make a note for further installation.
SD Card Slot
Reset Button
Test Video Output
DESI PAK
DESI PAK
DESI
P
DD
SI PAK
