WaveSplitter WST-POT001, Руководство по эксплуатации

Страница: 25 / 37

Copyright © 2020 Wavesplitter AV Technology | Wavesplitter .com
TEL
：
1-510-0651-7800 MAIL
：
sales@wavesplitter.com
OPERATION MANUAL
RS232 Control
Suggest to use the application “CommUart Assistant” to process RS232 commands. Please select the correct COM Port and
baud rate. You can check or adjust your baud rate through OSD setting. Please press Enter to the next row before you send the
command.
Baud Rate 115200 bps
Parity NONE
Data Bits 8 bit
Stop Bits 1 bit
Command Function Note
#video_d outA matrix=B Matrix Mode
A=0: All output
A=1-4: Output 1-4
B=1-4: Input 1-4
#video_d outA
coord=B1,B2,C1,C2,D1,D2,E1,E2,0,0,0,0,0,0,0,0,
Video Wall
Mode
A=1-4: Output 1-4
B1 & B2=The start parameter of the image that is going to
show.
C1 & C2=The end parameter of the image that is going to
show.
D1 & D2=The start parameter of the complete image.
E1 & E2=The end parameter of the complete image.
*Parameter range: 0-6000
#audio_d outA off=B Audio On/Off
A=0: All output
A=1-4: Output 1-4
B=0: Turn off the audio
B=1: Turn on the audio
#audio_d outA delay=B Audio Delay
A=0: All output
A=1-4: Output 1-4
B=0-250: 0-250 seconds
#edid_d inA data=B EDID Setting
A=0: All output
A=1-4: Output 1-4
B=0: 4K
B=1: 1080p
#edid_1 inA data=B EDID Lock
A=0: All output
A=1-4: Output 1-4
B=0: Unlock EDID
B=1: Lock EDID