WRC-1 Wi-Fi Router / User Guide
5
Set 5G Wi-Fi Password Using WRC-1 Management Software.
1. Disconnect the computer that you will use to configure WRC-1 from all connected networks and disable Wi-Fi.
2. Connect any available WRC-1 LAN port to a port on the computer, using Cat 5e cable.
3. Open a browser and type:
192.168.2.1
, followed by
Enter
.
4. When, prompted type
admin
and click
Enter
.
5. Click the
Wi-Fi Setup
tab on the left sidebar.
6. Click
5G
tab on the top left side of the Wi-Fi Setup page.
7. Under WPA-PSK select
encryption
from the menu.
8. Enter your 8-character password under
5G Wireless Password
and click
Save
.
9. Reboot WRC-1 and connect to a WRC-1-5G Wi-Fi network using your mobile device. When prompted,
enter your new Wi-Fi Password.
