Waves PuigChild, Руководство пользователя

Страница: 5 / 24

5
IMPORTANT SAFETY CONSIDERATIONS
Securely mount the Waves PuigChild in a 19” studio rack away from rain, moisture, liquids,
heat sources or fire using the four supplied mounting bolts. (Plastic washers are provided to
prevent scratching). Apply the rubber feet for desktop use.
In case of damage to the Waves PuigChild due to spilled liquids or physical damage from
knocks or dropping, repairs should be performed by qualified service personnel only.
Read all operating instructions.
Do not allow children to use the PuigChild without adult supervision.
Do not overload audio inputs or outputs. Waves will not be responsible for damage caused to
other equipment (such as speakers) through misuse.
Do not block the ventilation grills that are located on the sides of the unit.
PLEASE NOTE: THE POWER SUPPLY IS NOT AUTO-SWITCHING!
You must check to make sure the voltage rating shown directly on the back panel of your
Waves PuigChild is appropriate for your power connection. Please see the diagram below. To
change voltage, gently pull out the fuse holder. It can be pried out by inserting a screwdriver
under the edge by the IEC plug and pulling out gently. Insert it back with the desired voltage
positioned according to the 4 diagrams below. Make sure that the desired voltage marking is
at the top of the compartment.
Please read, complete and return by mail the Warranty Registration Form entitling you to
technical support and service under warranty.
WARNING: CLASS 1 LASER PRODUCT (SINGLE-MODE)