Waves PuigChild, Руководство пользователя

Страница: 11 / 24

11
Connecting the PuigChild
Main Power Supply
: 100, 120, 220 or 240 volt selectable
PLEASE NOTE: THE POWER SUPPLY IS NOT AUTO-SWITCHING!
You must make sure the voltage rating shown on the back panel of your PuigChild is appropriate
for your power connection.
The power cable socket and fuse-holder with voltage selector are located together on the
back panel of the PuigChild. Plug the supplied cable into the back of the PuigChild and into
your power connection. Switch on the PuigChild using the on/off power switch located on the
front panel. When you switch the power on, the front panel LED displays will illuminate.
Replacing the Fuse
If the fuse blows, switch off the power and unplug the unit. Pull off the fuse holder (see diagram
above) and replace the fuse. Do not forget to replace it with the proper voltage selection
indicated!
We suggest using the following UL listed (slow-blow) fuses:
t For 100/120 V, use a 200 mA fuse
t For 220/240 V, use a 100 mA fuse