Waves CA1000 / User Guide
17
Subgroups Presets
Handheld Group Preset
Designed to
optimize the PA for the summation of multiple handheld or table mics used in a typical installation
environment. This preset should be used to ring out the system prior to setting the individual input channel presets.
Some adjustments may be needed to fine-tune for a specific installation.
Processing Chain by Plugins:
•
F6-RTA
is first in the chain to help focus the audio processing tasks.
•
X-FDBK
provides real-time feedback suppression. It identifies the precise frequencies that cause feedback
and surgically cuts them, dramatically shortening the setup time required. At installation, X-FDBK should be
set up to capture the specific characteristics of the room.
•
GEQ Modern
is the final plugin in the chain. It is used to remove any remaining problem frequencies in the
handheld mic group. Although basic generic EQ notches are provided for many common problematic
frequencies, these should be adjusted as needed during installation system tuning.
Lav Group Preset
Designed to
optimize the PA for summing multiple lavalier (lav) mics. This preset should be used to “ring out” the
system prior to setting the individual input channel presets. Some adjustments may be needed to fine-tune for a
specific installation use case.
Processing Chain by Plugins:
•
F6-RTA
is first in the chain to help focus the audio processing tasks.
