Waves CA1000 / User Guide
16
Gooseneck Mic Preset
Designed to
reduce problems commonly encountered when gooseneck mics are mounted to a lectern or table
stand. Some adjustments may be needed to fine-tune for a specific installation.
Processing Chain by Plugins:
•
X-FDBK
provides real-time feedback suppression. X-FDBK identifies the precise frequencies that cause
feedback and surgically cuts them, dramatically shortening the setup time required.
•
F6-RTA
is used to make precise EQ adjustments to the voice audio based on the type and installation
placement of the mic.
•
Q4
provides the front-end EQ to reduce low frequency thumps (which may occur from bumping the lectern or
table area around the gooseneck mic) and boost the mid- and high-mid frequencies for improved voice clarity.
•
PSE
helps to decrease ambient noise and potential phasing issues from other nearby mics. PSE also lets you
reduce stage bleed and sensitivity to feedback when a mic is idle by automatically lowering mic levels when
that mic is not being spoken into.
