VP330
Control the player with folders and files
Oct 2021
Version : 2.1 (for firmware 1.11 or higher)
29
The folder can be interrupted.
If a folder is defined by an action but the folder is missing, then the action is ignored.
8.2.1. [Jxxx] - Jump to folder xxx at the end of the playback of the folder
This tag defines the behaviour at the end of the playback of the folder. It defines the number of the next
folder to be played.
000[J000] : Read files in a loop at the power on.
001[J002] : Jump to folder 002 at the end of the playback of folder 001
003[J003] : Jump to folder 003 at the end of the playback of folder 003 ->Loop on folder 003
008[J023] : Jump to folder 023 at the end of the playback of folder 008
127[J000] : Jump to folder 000 at the end of the playback of folder 127
At each loop, all tags of the folder are executed.
If targeted folder does not exist, then the playback is stopped at the end.
A targeted folder can be empty. In this case the playback is instanteneous. Also all tags are executed.
The playback stops exept if it has tags [Jxxx] or [RET] in its name.
8.2.2. [LOOP] - Play the folder in loop without the tags at each loop.
This tag executes a loop playback without executing the other tags named in the folder. This tag is of
interest if you are using for example tags [RES] or [RSS] to control output contacts. Indeed you avoid
unnecessary commutations of outputs in this case.
001[LOOP]
8.2.3. [RESUME] - Save the reading position of the files when returning to
the folder
When the player leaves a folder to read another folder and then come back to the first folder, the playlist
is reninitialed. In some occasions, you want to restart where the player stopped. For example a folder
contains 10 files and the first 5 have been read already. With tag [RESUME], the playback will restart at
file 6 and not at file 1.
Case of a missing folder
Example of loop playback at power on
Other examples
Specific cases
Example
