Wavemaster TWO NEO, Руководство пользователя

Страница: 18 / 32

English
Bluetooth Audio Playback
Activate the Bluetooth (BT / ) function of your audio source (e.g. your smartphone). Switch on
TWO
NEO
/
PRO
by pushing on the volume knob or the IR remote POWER button. Select BT by
short pushing the volume knob (SOURCE on IR remote) until reaching the BT position (blue
colour indication).
1.
TWO
NEO
/
PRO
confirms the activation of its Bluetooth function through quick flashing the BT
control LED.
The BT system first tries to re-connect with previous BT source and is protected against any
other device at this moment!
In case an earlier connected BT source is available,
TWO
NEO
/
PRO
will instantly connect to
that BT source again. When connected, the BT control LED lights constantly. Now you can
start BT playback through
TWO
NEO
/
PRO
.
2. In case no prior connected source is available, after few seconds, TWO
NEO
/
PRO
will search
for new BT sources. This action will be confirmed by slow flashing of the BT control LED.
Just during this search phase the BT system is visible to other devices for apprx. 2 minutes
and can be paired to a new source
Now start the Bluetooth search function of your BT souce (e.g. smartphone). After a moment,
you can find “wavemaster TWO
NEO
/
PRO
“ in the BT devices list of your BT source. Select
“wavemaster TWO
NEO
/
PRO
“ for pairing. Your BT source will now pair with TWO
NEO
/
PRO
. Once
the pairing procedure is finished the TWO
NEO
/
PRO
BT control LED lights constantly.
When the BT connection is interrupted through foreign signals interference or by too long
distance, playback will be stopped and the BT control LED shows flashing light. Once the BT
source can be received again, playback continues and the BT control LED lights constant again.
BT safety: Bluetooth offers a high safety and is protected against foreign access. To connect
TWO
NEO
/
PRO
to a new BT source, after activating the BT function, it will be visible to other BT
sources only during the BT search phase and can be paired to a new BT source. After apprx. 2
minutes the search phase is ended and the system will be protected against foreign access
again.
To switch off the Bluetooth function select any other input source. This will completely deactivate
the built-in BT function.
AptX : if your BT source device supports AptX, this sophisticated transmission technology will be
activated in both devices automatically.
After both devices have achieved a stable BT connection, the activation of the AptX function
might be confirmed by the BT audio source device.
BT source devices without AptX automatically always use the normal BT audio connection.
Bluetooth playback from PC : please note, for audio playback, the source device need to
support the Bluetooth standard A2DP . In case of e.g. WINDOWS (TM) operating systems, it is
inevitable to MANUALLY install the Bluetooth driver of the Bluetooth device maker ! The Windows
internal driver by the automatic driver installation is not suitable to support A2DP BT audio!
Subwoofer Output
The subwoofer output of TWO
NEO
/
PRO
offers the connection to a active subwoofer with line input
and electronic subwoofer filters, to extend the system playback at the range of lowest
frequencies. This output provides the non-filtered mono summary signal of the actual playback
source, in dependance from
TWO
NEO
/
PRO
's volume control. All sound adjustments to match the
subwoofer with TWO
NEO
/
PRO
need to be set by using the filters and other controls of a connected
active subwoofer .
18