background image

© 2013

PAGE 13

WTC3293

www.teamwavelength.com

WTC3293-00400-I

NOTICE: 

The information contained in this document is 
subject to change without notice. Wavelength 
will not be liable for errors contained herein 
or for incidental or consequential damages in 
connection with the furnishing, performance, or 
use of this material. No part of this document 
may be photocopied, reproduced, or translated to 
another language without the prior written consent 
of Wavelength.

SAFETY:

There are no user serviceable parts inside 
this product. Return the product to Wavelength 
for service and repair to ensure that safety fea-
tures are maintained.

LIFE SUPPORT POLICY:

As a general policy, Wavelength Electronics, Inc. 
does not recommend the use of any of its products 
in life support applications where the failure or 
malfunction of the Wavelength product can be 
reasonably expected to cause failure of the life 
support device or to signi

fi

 cantly affect its safety 

or effectiveness.  Wavelength will not knowingly 
sell its products for use in such applications 
unless it receives written assurances satisfactory 
to Wavelength that the risks of injury or damage 
have been minimized, the customer assumes all 
such risks, and there is no product liability for 
Wavelength. Examples of devices considered to be 
life support devices are neonatal oxygen analyzers, 
nerve stimulators (for any use), auto transfusion 
devices, blood pumps, de

fi

 brillators,  arrhythmia 

detectors and alarms, pacemakers, hemodialysis 
systems, peritoneal dialysis systems, ventilators of 
all types, and infusion pumps as well as other 
devices designated as “critical” by the FDA.  The 
above are representative examples only and are not 
intended to be conclusive or exclusive of any other 
life support device.

CERTIFICATION AND WARRANTY

CERTIFICATION:

Wavelength Electronics, Inc. (Wavelength) certi

fi

 es 

that this product met it’s published speci

fi

 cations at the 

time of shipment. Wavelength further certi

fi

 es that its 

calibration measurements are traceable to the United 
States National Institute of Standards and Technology, 
to the extent allowed by that organization’s calibration 
facilities, and to the calibration facilities of other 
International Standards Organization members.

WARRANTY:

This Wavelength product is warranted against defects 
in materials and workmanship for a period of 90 days 
from date of shipment.  During the warranty period, 
Wavelength will, at its option, either repair or replace 
products which prove to be defective.

WARRANTY SERVICE:

For warranty service or repair, this product must 
be returned to the factory.  An RMA is required 
for products returned to Wavelength for warranty 
service.  The Buyer shall prepay shipping charges 
to Wavelength and Wavelength shall pay shipping 
charges to return the product to the Buyer upon 
determination of defective materials or workmanship. 
However, the Buyer shall pay all shipping charges, 
duties, and taxes for products returned to Wavelength 
from another country.

LIMITATIONS OF WARRANTY:

The warranty shall not apply to defects resulting from 
improper use or misuse of the product or operation 
outside published speci

fi

 cations.

No other warranty is expressed or implied. Wavelength 
speci

fi

 

cally disclaims the implied warranties of 

merchantability and 

fi

 tness for a particular purpose.

EXCLUSIVE REMEDIES:

The remedies provided herein are the Buyer’s sole 
and exclusive remedies. Wavelength shall not be 
liable for any direct, indirect, special, incidental, or 
consequential damages, whether based on contract, 
tort, or any other legal theory. 

REVERSE ENGINEERING PROHIBITED:

Buyer, End-User, or Third-Party Reseller are 
expressly prohibited from reverse engineering, 
decompiling, or diassembling this product.

 

REVISION HISTORY

REVISION

REV. E

REV. F

REV. G

REV. H

REV. I

DATE

24-Nov-03

5-Oct-09

23-Jul-10

3-May-11

25-Jan-13

NOTES

Initial release

Updated to re

fl

 ect RoHS 

compliance

Added many new features.  
Revision change to B.

Added link to prior revision 
datasheet.

Added socket manufacturer

WAVELENGTH ELECTRONICS, INC.
51 Evergreen Drive 
Bozeman, Montana, 59715
web: 

www.teamwavelength.com

phone:  (406) 587-4910  Sales/Tech Support
fax: (406) 

587-4911

e-mail: 

[email protected]

Содержание WTC3293














Отзывы: