12
In Section 2 of the manual (go back and read it if you haven’t!) we explained that low signal
quality happens because of “intra-cell interference.”
The best way to improve signal quality is to “shield” the outdoor antenna from any other
towers in the area, by putting it on the side of the building.
When the signal quality outdoors is low, the goal is to shield the outdoor antenna to reduce
the signal from other nearby towers:
For some people, the top of their roof (where signal is the strongest) provides the best
signal. For others, it’s the side of the house. The only way to fi nd which is best is to test.
Once you’ve found the best outdoor antenna location according to the Antenna Position
Test, it’s time to temporarily secure the outdoor antenna, connect the second GO X, and set
up a “temporary install.”
The following 4 pages explain
mounting the indoor antennas
,
antenna separation
, and
how to assemble your GO X MIMO system
. Read them before you start.
We recommend securing the outdoor antenna temporarily, and running the twin coax
cable indoors through a window or a door without drilling any holes. Now connect both of
your GO X's and in turn connect them to the indoor antenna.
Once you’ve done that, you can test your coverage and data rates. If everything is looking
good, you can move to a permanent install. More on this in section 10.
If you’re having issues with your temporary setup, or aren’t happy with the performance,
simply
call us at (800) 761-3041 or email [email protected]
. We’ll be happy to help
assist - we can often suggest an easy solution to the most common problems.
Set up a Temporary Install
06
