from
The GO X MIMO Kit is manufactured by Cel-Fi, but developed
and supported by Waveform and our team of Signal Specialists.
We’ve helped over 30,000 customers boost their signal since our
company was founded in 2007.
We’ve installed and confi gured
thousands of devices in buildings across the country, and
we’re
here to help
. If you have any issues at all, please don’t hesitate to
reach out.
52 Maxwell,
Irvine, CA 92618
+1 (800) 761-3041
www.waveform.com
About Waveform
Please note: Your two Cel-Fi GO Xs will come pre-programmed to boost Verizon signal
.
You will need to change the carrier on both units using the Wave app if you are using a different provider.
We know, reading manuals isn’t always fun. But we promise it’s worth it.
We’ve helped thousands of customers install the Cel-Fi GO X and boost their
signal. We’ve compiled everything we’ve learned in this manual.
Give it a read before you start: it’ll save you time and help you get the best
performance out of your GO X MIMO setup.
Please Read This First
