
WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
25
4.1.7
Card Identification +CCID
This command instructs the module to read the EF-CCID file on the SIM
card.
Command syntax:
AT+CCID
Response syntax:
+CCID: <id>
In case of absent EF-CCID file on the SIM, the +CCID will not be sent. But
the OK will be present.
Example:
Application to GSM
AT+CCID
get card id
GSM to application
+CCID: "123456789AB111213141"
OK
EF-CCID is present, hexadecimal format
Application to GSM
AT+CCID?
get current value
GSM to application
+CCID: "123456789AB111213141"
Same result as +CCID
Application to GSM
AT+CCID=?
get possible value
GSM to application
OK
no parameter but this command is
valid
4.1.8
Capabilities list +GCAP
This command gives the complete capabilities list.
Command syntax:
AT+GCAP
Example:
Application to GSM
AT+GCAP
Get capabilities list
GSM to application
+GCAP: +CGSM +FCLASS
OK
Supports GSM commands and FAX
4.1.9
Repeat last command
A/
Only A/ command can not be repeated. This command only repeats the last
valid command, that means the result of the previous command was not
an error.
Command syntax:
A/
Example:
Application to GSM
A/
Repeat last command
4.1.10
Power off +CPOF
This
specific
specific
command stops the GSM software stack and then the
hardware layer. The AT+CFUN=0 command is equivalent to +CPOF
Command syntax:
AT+CPOF
Example:
Application to GSM
AT+CPOF
stop GSM stack
GSM to application
OK
Command valid