WAVE EXCITE CLASS & TREND, Руководство по техническому обслуживанию

Страница: 57 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 5.5
5.4. INSTALLATION
To correctly install the machine, proceed as follows:
1.
Ensure that the specifications and requirements for installation have been met (see paragraph:
5.1. “Specifications and requirements”).
2. Position the machine as specified above, on a level surface that is free of vibrations and has
sufficient carrying capacity for the combined weight of the machine and user.
3. Depending on the destination country, the machine may be shipped partially disassembled,
packed inside a special carton and fixed to a pallet, or fully assembled, wrapped in clear plastic
and fixed to a wooden pallet.
Follow the assembly operations described in the instruction sheets supplied with the machines.
Only for 500, 700 and 700WTV models.
4.
Connect the mains lead to the power inlet socket on the machine.
5. Place the on/off switch in the 0 position.
6. Plug the mains lead into the wall outlet.
Only for 700WTV model.
7.
Connect the antenna cable to the socket.
5.5. FIRST POWER-ON
After completing the installation procedure, the machine is ready for use.
On the 500, 700 and 700WTV models, simply turn the on/off switch from position 0 to position 1,
while on the 500SP and 700SP models it is necessary to get on the machine and start pedaling.
On power-up the machine performs a self-test of the upper and lower assemblies. After completing
the self-test, the machine enters the stand by state, awaiting a command from the keyboard.
To check the correct operation of the machine:
•
get on the machine;
•
start exercising;
•
check that the displayed speed varies accordingly;
•
check that exercise resistance varies when the “+” and “-“ effort level keys are pressed, or the
touch sensors on the 700, 700 SP and 700WTV models are pressed, and the effort level change
from 1 to 25;
•
put on the heart rate meter and check that the machine correctly reads the heart rate value;
•
only for 700, 700 SP and 700WTV: grasp the sensors and check that the machine correctly
reads the heart rate value.
•
only for 700WTV: Carry out the procedure described in paragraph: 9.9. “Touch screen
calibration
”.