Wattsense BOX, Руководство по установке

Страница: 13 / 42

2020-12-V1.3
12
● Check that the ETH1 or ETH2 LED lights up.
Configuration:
● If there is not a DHCP server on the network, attribute a static IP address, its mask
and the gateway if necessary to the Box (Discuss with the building’s IT manager).
● If there is a DHCP server on the network, the address is automatically assigned.
Information to retrieve in preparation for the configuration:
● For each device that communicates in Modbus IP
○ From the BMS software, perform an extract of the available properties: list
the data types provided by the different devices to which the BMS has
access.
○ If it is impossible to retrieve this information, recuperate the IP address and
TCP port (and if needed, for some devices, the slave address (Slave ID), the
brand, and model of the equipment, and extra identifying information. This
information is necessary for the installation configuration and to retrieve data.
● In the case of a BACnet IP network
○ Write down the BACnet port of the network. This information will be
necessary for the installation configuration and to retrieve data.