12
7 LED Indicator
8 Troubleshooting
Description
Led Indicator
Standby
Solid Purple
Connector Plug in
Solid Blue
Charging
Flashing Green
Fully Charged
Solid Green
RFID Card Setting
Solid Orange
Fault
Flashing RED
LED Status
Problems
Solutions
The red light flashes slowly
once and quickly once,
alternately cycle.
Grounding Fault
1. Immediately turn off the leakage/over
-
current protection switches in the power
distribution box.
2. Check whether the input cables are
grounded correctly.
3. After the fault is rectified, power on
the device again. If the fault persists,
contact us.
The red light flashes slowly
twice and quickly twice,
alternately cycle.
Output Overcur
-
rent
1. Immediately turn off the leakage/over
-
current protection switches in the power
distribution box.
2. Check whether there is low imped
-
ance or short circuit between the char
-
ger output line.
3. Ensure the charging current to less
than 35A.
4. After the fault is rectified, power on
the device again. If the fault persists,
contact us.
The red light flashes slowly
twice and quickly for 4 times,
alternately cycle.
Over-heating
1. Check the charger installation envi
-
ronment.
2. Check whether there are other heat
-
ing devices nearby.
3. Ensure that the ambient temperature
is below 50℃ .
