Watts tekmar 743, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 8

6
Step 3 - Wiring
Conduit Connector
Pull wires through conduit connector and provide enough wire length to con-
nect to wiring terminals. Tighten the conduit connector nut.
Clockwise to Open
• Connect the rotate clockwise terminal to the open wiring terminal on the
control.
• Connect the rotate counterclockwise terminal to the close wiring terminal on
the control.
• Connect the Com terminal to the Common terminal on the control.
Actuating Motor 743
C
1 2 3
Mixing Control
Powered Output
R R
C Opn Cls
Clockwise
to Open
C C R R
C
1 2 3
Mixing Control
Unpowered Output
R Opn Cls
Mix
Actuating Motor 743
Class 2
Transformer
24 V (ac)
Clockwise
to Open
Counterclockwise to Open
• Connect the rotate counterclockwise terminal to the open wiring terminal on
the control.
• Connect the rotate clockwise terminal to the close wiring terminal on the
control.
• Connect the Com terminal to the Common terminal on the control.