![background image](http://html2.mh-extra.com/html/watts/ss009/ss009_installation-instructions-manual_3751336006.webp)
6
3. Press the RESET button to activate the new settings.
6. Press the sensor activation module with cable on to the
flood sensor.
5. Remove the dust cover from the flood sensor.
Retain the dust cover to protect the flood sensor during
temporary instances when the sensor activation module
may need to be removed or replaced.
NOTICE
4. Reattach the cover with the four screws, making sure
the O-ring inside the cover is properly seated to maintain
a seal.
7. Check that the sensor activation module is seated
securely on the flood sensor.