4
Step A
Lift black faucet handle up on faucet to start flow of water
through unit. Run 7 gallons of water through unit. Close
faucet.
Note: You may hear some noise as air is being purged from the
unit and the first few glasses of water through the unit may be
dark in color due to carbon fines.
Step B
Check for leaks. If you have any leaks, shut off water sup-
ply to system, repair and restart unit.
Step C
Connect plastic electrical connector from UV unit to the
plastic electrical connector from AC adapter.
Step D
Plug adapter into GFCI electrical outlet. You will see a
pale blue light from the view port on the UV housing
body. The light indicates that the UV lamp is on and
working.
Please follow these guidelines:
Do not unplug UV unit from power supply. Turning system off
and on will shorten the life of the UV lamp. UV should be on
continuously for maximum effectiveness.
The system requires a warm-up period for proper operation.
Wait 20 minutes after plugging in the system before using water.
Water not drawn from unit for a period of time may have a
taste or odor and will be warm. To avoid this, allow water to run
through the system for one minute before using.
Start Up Instructions
Adapt-A-Valve™ Installation
Verify contents prior to installation:
( 1 ) - Plastic Adapt-a-Valve™ & Black Collet
( 1 ) - Brass Adapter no washer
( 1 ) - Brass Adapter with black washer
( 1 ) - White rubber washer
Water supply line to the system must be from the cold water
supply line only. Hot water will severely damage your system.
WARNING: Do not use Teflon tape with the Adapt-A-Valve™.
For
3
⁄
8
" Configuration
For
1
⁄
2
" Configuration
Step A -
Turn off the cold water supply to the faucet by turning the
angle stop valve completely off.
Step B -
Open cold water sink faucet to relieve pressure.
Step C -
Choosing the configuration that fits your plumbing, at-
tach the Adapt-A-Valve™ as illustrated in the four photos
above.
STEP 4
Hot
Supply
Cold
Supply
Hot
Supply
Cold
Supply
(With Brass Fittings)
* Insert White Washer
(Without Brass Fittings)
1
⁄
2
" Configuration
Содержание PWDWUV3
Страница 7: ...7...
