Installation & Wiring
1
Place the MILUX thermostat (
A
) on a plain wall away from windows and doors and not to close to the heater.
Put the connection wires (
B
) thru the back hole of the rear part. Use the screws (
C
) to mount the rear part on the wall.
2
Connect the wires to the connector (
D
).
Follow the connection diagram
3
Remove the plastic isolator on the batteries to power up the
MILUX. Then close the MILUX as explained in step 3 of
the batteries replacement (last page)
4
Adjust the time and follow the QUICK START instructions
DIM
Instructions
