![background image](http://html1.mh-extra.com/html/watts/lync-wq-uv/lync-wq-uv_installation-operation-and-maintenance-manual_3873638014.webp)
Lync WQ-UV
SECTION 3: Operation
L- OMM-006_0A
•
1/26/2022
Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
14
of
38
3.6.3. Normal Operation
System checks are automatically executed by the controller in the
Start Up Screen
then the
system advances to the
Lamp Warm Up Screen
. If an abnormal condition exists, a variety of
alarms can be displayed.
3.6.4. Possible Alarms
Upon start-up of the system, if the UV sensor is not found, the
user will be notified via this screen. The system will continue to
the
Home Screen
when a UV sensor is not found and display
the warning message.
The lamp identifies its self via radio frequency. If the wrong lamp
is used in a system this message will appear during start up.
Every 15 seconds the screen will change from the Invalid Lamp
Type message to the Name of Dealer message. Touch on the
QR Code to display the correct lamp QR code in full.
Upon touching the QR code, the full QR code is displayed.