Watts HC-300 Скачать руководство пользователя

Страница: 4 / 44

Table of Contents

Page

Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
How To Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Project Data Sheet  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 –7
Set Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Operating Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
System Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9–10
Start Up Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Installation Diagrams - Series HC-300 Simplex Systems  . . . . .12
Installation Diagrams - Series HCTA-300

Duplex Alternating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Installation Diagrams - Series HCP-300

Progressive 2-4 Tank Systems. . . . . . . . . . . . . . . . . . . . . . . . .14
Controller Electrical Connections . . . . . . . . . . . . . . . . . . . . . . .15
Wiring Diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
NXT2 Controller Programming and Operation  . . . . . . . . . . . . .17
Controller Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Controller Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Controller Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20–21
Master Programming Mode Flow Chart . . . . . . . . . . . . . . . 22–23
User Programming Mode Flow Chart. . . . . . . . . . . . . . . . . . . .23
Diagnostic Programming Mode Flow Chart  . . . . . . . . . . . . . . .24
Time of Day Programming Mode Flow Chart . . . . . . . . . . . . . .25
NXT2 Programming Parameters and Ranges. . . . . . . . . . . . . .26
Replacing the Media  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27–28
Replacement Parts - Major System Components  . . . . . . .29–30
Replacement Parts - 3900 Upper Powerhead . . . . . . . . . . . . .31
Replacement Parts - NXT2 Controller Assembly  . . . . . . . . . . .32
NXT to NXT2 Conversion Kit  . . . . . . . . . . . . . . . . . . . . . . . . . .33
Replacement Parts - 3900 Lower Powerhead . . . . . . . . . . . . .34
Replacement Parts - 3900 Control Valve Body  . . . . . . . . . . . .35
Replacement Parts - 1800 Brine Valve. . . . . . . . . . . . . . . . . . .36
Replacement Parts - 1800 Injector Assembly  . . . . . . . . . . . . .37
Replacement Parts - 3" Stainless Steel Electronic Meter  . . . . .38
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39–40
Water Softener Flow Diagrams  . . . . . . . . . . . . . . . . . . . . .41– 42
Flow Data and Injector Draw Rates - Down Flow . . . . . . . . . . .43
Injector Nozzle and Throat Chart

for 1800 Brine Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Introduction

Principals of Softening- Ion Exchange

In nature, water acts as a solvent that dissolves substances it

comes in contact with such as solid rock. When water dissolves

limestone rock, which is composed of calcium and magnesium,

the solid calcium and magnesium become ions. This means

they have been dissolved into the water and are now a liquid. An

ion with a positive electrical charge is called a cation. Calcium

and magnesium hardness ions in water are positively charged

cations. When water dissolves enough calcium and magnesium

hardness cations it is classified as hard water, which can cause

lime scale build up in plumbing systems, water spots, and an

increase in soap and cleaning product usage.
Ion exchange water softening is a process where an ion

exchange resin is used to effectively exchange calcium and

magnesium hardness cations for sodium cations in the water.
New, or freshly regenerated, ion exchange resin is saturated with

sodium cations. As calcium and magnesium hardness cations

come in contact with the ion exchange resin, they attach to the

resin and sodium cations are released into the water. This is

possible because the hardness cation are more attracted to the

ion exchange resin than the sodium cations. Therefore, scale

forming calcium and magnesium cations have been exchanged

for non-scale forming sodium cations as the water is treated. If

the calcium and magnesium content of the water is reduced to

less than 17.1 mg/L, that water is classified as soft water.
Eventually the ion exchange resin will become exhausted, depleted

of sodium, and will need to be regenerated with a sodium brine

solution to restore its capacity to soften water. This system

includes a flow meter to track treated water volume and initiate

the regeneration process before resin exhaustion occurs.

Regeneration occurs automatically and consists of 5 steps:

Step 1- Backwash

Approximate Duration 10 Minutes- Fresh water flow is directed

upward through the resin bed, to remove solid particles the resin

bed has captured, sending them to drain.

Step 2- Brine Draw

Approximate Duration 15-20 Minutes- Brine water is drawn from

the brine tank, rinsed over the ion exchange resin, driving away

the calcium and magnesium cations and restoring sodium cations

within the resin. Calcium and magnesium is sent to drain.

Step 3- Slow Rinse

Approximate Duration 40-45 Minutes- Once the brine tank is

emptied of brine water, fresh water will continue to rinse over

the resin and rinse calcium and magnesium cations to drain.

Step 4- Rapid Rinse

Approximate Duration 10 Minutes- After the conclusion of slow

rinse, fresh water will rinse over the resin to ensure any residual

sodium brine has been cleaned from the resin before it returns

to service.

At the conclusion of Rapid Rinse:
Simplex single tank systems return to the “In Service” position.

Multi tank systems remain in the “Stand By” position.

Step 5- Brine Tank Refill

Approximate Duration User Adjustable- In this final step of

regeneration, water is added back into the brine tank so that

a brine solution can be prepared for the next regeneration.

Содержание HC-300













































Результаты поиска

Содержание HC-300

Отзывы:

Похожие инструкции для HC-300

Бренды по названию

Популярные бренды

Watts HC-300, Руководство пользователя

Результаты поиска

Содержание HC-300

Отзывы:

Похожие инструкции для HC-300

Бренды по названию

Популярные бренды