Watts E-Treat ETREATWCS, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 12

9
REPLACEMENT COMPONENTS
Item QTY Part No. Description
1 1 68100992 13" x 65" Black Tank- in-Tank With Base & Dome Hole with Plug
2 1 68101076 Distributor Pipe 1.05" Diameter ABS
3 1 68101149 Distributor Screen for Inner Tank 3/4" MPT With 4 Screens/ 5.75" length
4 1 68101280 Distributor Adapter for Mid Plate Large Tank-in-Tank
5 1 68103002 Female Plumbing Adapter PVC SCH 40 3/4" SXF
6 1 68104871 Tank Head 1191 Without Bypass Valve Assembly
7 1 68104876 W100 Bypass Valve Assembly, Does Not Include Plumbing Adapters
8 2 68106630 WS1 Plumbing Adapter Fitting Assembly 1" MNPT (2 per Pack)
Part No. 68108439
Funnel to fill carbon
media through top
of tank.
1.5" PVC Class 200
Pipe 32" Long and
2.5" x 1.5" SXS PVC
Reducing Coupling
Diagram B
PART NO. REBED KIT
68110169 Replacement Carbon and OneFlow
®
Media
68110145 Replacement Carbon and OneFlow
®
Media Plus Tools
Note: Before replacing any media ensure you have a wet/dry vacuum, all your media replacement tools shown in
image above, and rebed kit ready in order to proceed.
Media Replacement Tools
Tools needed to replace E-Treat media that are not supplied by
Watts: Standard wet/dry vacuum, and tape.
Part No. 68110144 2.5" x 1.5" Reducing Coupling used to hold
removal tube in place (keeps removal tube from falling into
tank) while filling OneFlow
®
media, It also acts as a small
funnel while filling.
Part No. 68101278 Removal and Insertion Tool for mid plate
insert and filling tube for OneFlow
®
media.
Part No. 68106617 1" PVC Hose 6 ft Long
to adapt to vacuum if standard vacuum
hose (customer supplied) is too short to
reach bottom of tank.
Tape (customer supplied) to
cover distributer tube when
filling carbon media.