Watts BT-PR02-RF, Руководство пользователя

Страница: 4 / 24

4
CZ
Plug Receiver
1. Presentation
- The receiver is a plug mounting receiver, specially designed to control
electrical radiator regulation in combination with a wireless thermostat BT-DP02 RF
type.
- This couple (Thermostat Receiver) can also be managed by a Central to
have full control of your heating installation from one point.
- Possibility to use the receiver as On/Off Timer in combination with a
Central unit.
2. Technical characteristics
Environment. (Temperatures)
Operating :
shipping et storage :
0°C - 40°C
-10°C to +50°C
Power supply 230Vac 50Hz by European plug socket
Electrical protection Class II - IP20
Output
Maximum Load
Relay 16Amps 250VAC
Up to 16A - 250Vac 50Hz (by European plug socket)
Radio Frequency &
RF Receiving distance
868MHz < 10mW (Bidirectional communication)
Range of approximately 100m in open space.
Range of approximately 30m in residential environment.
EU declaration of conformity
Hereby, Watts Electronics declares
that the equipment is in compliance
with the relevant Community
harmonisation legislation
Directive 2001/95/EC on General Products Safety
Low voltage directive 2006/95/EEC
Radio Equiment Directive 1995/5/EC-2014/53/EU
ROHS Directive 2011/65/EC
The full text of the EU declaration of conformity is available on
wattswater.eu
Product conformed to :
Classification :
Contribution :
UE 811/2013 and 2010/30/UE
IV
(2%)
Status LED (RED/Green)
Green: Standby mode
Red: Heating demand (Output on)
OFF: Off mode
ON/OFF button
Short press: On/Off
RF Configuration button
Short press: Instantaneous RF transmission
3sec press: Thermostat or Central RF init.
15sec press: Reset of the receiver.
RF LED (Green)
Fixed: RF configuration.
Flash: RF reception
OFF: Standby
Blink: RF Alarm
Red:
Blink: Timer 2H running
Timer 2H button
Short press: On/Off
(This function will not be fit back
to the BT-DP02 RF thermostat)
GB