Watts AMES LF685GD-20 Series Скачать руководство пользователя

Страница: 3 / 21

ES-A-ACV-LF985GD-20 2115

Threaded = 400psi (27.6 bar)
150# Flanged = 250psi (17.2 bar)
300# Flanged = 400psi (27.6 bar)
Grooved End = 400psi (27.6 bar)

Operating Pressure

Globe Flanged

Angle Flanged

Globe Threaded

Globe Grooved End

Angle Threaded

Angle Grooved End

Basic Valve Body Options

Standard Materials

Body and Cover:

Ductile Iron ASTM A536

Coating:

NSF Listed Fusion Bonded Epoxy

Lined

and

Coated

Trim:

316 Stainless Steel

Elastomers:

Buna-N (standard)

EPDM

(optional)

Viton™

(optional)

Nut, Spring and Stem:

Stainless Steel

Anti-Scale (Optional):

Xylan Coated Stem and Seat

Viton™ is a trademark of The Chemours Company FC, LLC

M Series Basic Valves

Deep Well Control Valve with Pressure Relief Feature

Full Port Ductile Iron Dual Chamber Basic Valve

ACV Schematic - Series LF985GD-20

This Ames ACV is a full port, dual chamber basic valve that

incorporates a one-piece disc and diaphragm assembly. This

assembly is the only moving part within the valve, allowing it to

open or close as commanded by the pilot control system.

When pressure is applied to the upper diaphragm chamber and

released from the lower diaphragm chamber, the valve travels

to a closed position. When pressure is applied to the lower

diaphragm chamber and released from the upper diaphragm

chamber the valve travels to a full open position. When pressure

is balanced between the upper and lower diaphragm chambers,

the valve will hold an intermediate position until commanded to

modulate open or closed by the pilot control system.

Ames ACV Main Valves are Lead Free. The Ames ACV piloting

system contains Lead Free* components, ensuring all of our con-

figurations are Lead Free compliant.

Globe Pattern Dual Chamber Basic Valve (

900GD)

Angle Pattern Dual Chamber Basic Valve (

900AD)

Operating Temperature

Buna-N: 160°F (71°C) Maximum
EPDM: 300°F (140°C) Maximum
Viton™: 250°F (121°C) Maximum
Epoxy Coating**: 225°F (107°C) Maximum

** Valves can be provided without internal epoxy coating consult factory

Содержание AMES LF685GD-20 Series






















Результаты поиска

Содержание AMES LF685GD-20 Series

Отзывы:

Похожие инструкции для AMES LF685GD-20 Series

Бренды по названию

Популярные бренды

Watts AMES LF685GD-20 Series, Руководство пользователя

Результаты поиска

Содержание AMES LF685GD-20 Series

Отзывы:

Похожие инструкции для AMES LF685GD-20 Series

Бренды по названию

Популярные бренды