Limited Warranty:
Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of
original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special
or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting
from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no
control. This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above
limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to
determine your rights.
SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.
RP-IS-909-909RPDA-FS-1915468 2137
EDP# 1915468
© 2021 Watts
USA:
T: (978) 689-6066 • F: (978) 975-8350 • Watts.com
Canada:
T: (888) 208-8927 • F: (905) 481-2316 • Watts.ca
Latin America:
T: (52) 55-4122-0138 • Watts.com
Part Number
Add-On/Retrofit Kit
Description
Add-on and Retrofit Sensor Connection Kits for BMS
88003050
BMS Sensor Connection Kit, for LF909-FS
Sizes 2½" to 10"
Includes a sensor activation module with cable, power adapter,
and ground wire. Use this kit to activate the integrated
flood sensor and enable flood detection capabilities for
the relief valve to work with a third-party BMS control box
(not included).
88003051
BMS Sensor Retrofit
Connection Kit, for LF909 Sizes 2½" to 3"
Includes a flood sensor, sensor activation module with
cable, power adapter, O-ring, mounting bolts, and ground
wire. Use this kit to add flood detection capabilities to the
relief valve of an existing installation working with a third-
party BMS control box (not included).
88003054
BMS Sensor Retrofit
Connection Kit, for LF909 Sizes 4" to 10"
Includes a flood sensor, sensor activation module with
cable, power adapter, O-ring, mounting bolts, and ground
wire. Use this kit to add flood detection capabilities to
the relief valve of an existing installation working with a
third-party BMS control box (not included).
Add-on and Retrofit Sensor Connection Kits for Cellular Communication
88003052
Cellular Sensor Connection Kit, for LF909-FS
Sizes 2½" to 10"
Includes a sensor activation module with cable, Cellular
Gateway with mounting kit, power adapter, and ground
wire. Use this kit to activate the integrated flood sensor
and enable flood detection capabilities and e-mail, text,
and voice notifications.
88003053
Cellular Sensor Retrofit Connection Kit,
for LF909 Sizes 2½" to 3"
Includes a flood sensor, sensor activation module with
cable, power adapter, Cellular Gateway with mounting kit,
O-ring, mounting bolts, and ground wire. Use this kit to add
flood detection capabilities to the relief valve of an existing
installation and enable e-mail, text, and voice notifications.
88003055
Cellular Sensor Retrofit Connection Kit,
for LF909 Sizes 4" to 10"
Includes a flood sensor, sensor activation module with
cable, power adapter, Cellular Gateway with mounting kit,
O-ring, mounting bolts, and ground wire. Use this kit to add
flood detection capabilities to the relief valve of an existing
installation and enable e-mail, text, and voice notifications.
Add-on and Retrofit Sensor Connection Kits
Determine the add-on sensor connection kit or retrofit sensor connection kit you need for your Series LF909 installation.
NOTICE
Removal of the flood sensor is not required for periodic inspection and maintenance or servicing checks.
