AERCO ProtoNode FPC-N34 & FPC-N35 User Manual
CHAPTER 3 – Interfacing ProtoNode to Devices
Page
26
of
108
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
OMM-0107_0B
03/07/2017
Ph.: 800-526-0288
GF-150
3.6.1
Auto-Discovery: After Completion – Turn Off to Save Configuration
The S3 DIP switch for Enabling Auto-Discovery should have been set in Section 2.4.2 before
applying power to the ProtoNode.
Do not
Enable Auto-Discovery when the unit is powered.
•
When power is applied to a ProtoNode that is set to Enable Auto-Discovery, it will take
10 minutes to complete the discovery of all of the RS-485 devices attached to the
ProtoNode.
•
Once the ProtoNode has discovered all of the RS-485 devices, set the S3 DIP
switch to the OFF position to save the current configuration.
ProtoNode FPC-N34 and FPC-N35
S3 DIP Switch Auto-Discovery Mode
S3
Auto-Discovery ON – Build New Configuration
On
Auto-Discover OFF – Save Current Configuration
Off
Figure 3-16: S3 DIP Switch setting for Auto Discovering Devices
