Do not use with water that is microbiologically unsafe or of unknown quality, without
adequate disinfection before or after the system. Installation needs to comply with state and
local plumbing regulations.
Operational Parameters
Step B:
Check faucet aerator threads. If your faucet aerator threads are the same as the diverter valve,
screw the diverter directly on to your faucet. (See figure below). If the aerator threads are different than the
diverter valve, the universal adapter will be required. (See figure on next page). If necessary, screw in the
universal adapter into the faucet.
1 single stage Counter top system
1 CT-1 Filter and Housing with faucet connector
1 Manual and Warranty Card
If any of the items are missing please contact Watts Premier prior to installing.
Tools Recommended For Installation
√
A pair of pliers may be required
Contents of Counter Top System
Installation
Step A:
Remove the faucet aerator by turning it counterclockwise, (as shown in Figure A).
To loosen (counter clockwise)
3
Maximum
Minimum
Operational Temperature
100°F (37.8°C)
40°F (4.4°C)
Operating Pressure
100 psig (7.43 g/cm²) 20 psig (1.406 kg/cm²)
pH Parameters
10
5
Flow Rate
0.5 GPM @ 60 psig
Содержание CT-1
Страница 2: ......
