WATTS INNOVATIONS PRISM R.P.A.S., Руководство по эксплуатации самолета

Страница: 51 / 141

PRISM FLIGHT MANUAL
51
1. The EchoSky Mobile ships with a default Mode 2 stick configuration in which the left
stick controls throttle and yaw, and the right stick controls the tilt direction about the
horizontal
axes.
2. The Flight Mode switch (21) enables the pilot to switch between programmable flight
modes. The default modes assigned to the switch positions are Altitude Hold, Altitude
Hold, and Position Hold. Users may customize these values in the WattsQGC app.
3. The RTL button commands an immediate RTL after a long press, bringing the aircraft
back to the take off site and automatically landing. The user can cancel an initiated RTL
with another short press of the RTL button. When the button is indeed activated after
a
long press, it illuminates blue.
4. The functions of customizable buttons can be assigned in the WattsQGC application.
Please note that the WattsQGC app is being under development, and future updates
may assign specific purposes to these buttons.
5. The Touch screen monitor displays aircraft telemetry and video feed, while allowing
the pilot to adjust settings, plan missions and send commands to the RPA. The user
may enter full-screen mode and clear the heads-up display (HUD) on the main screen
by tapping twice at the center of the screen. The user brings back the HUD by tapping
twice
on the screen again.
6. Press, then press and hold the power button on the RPS to turn it on and off. Please
note that after starting the WattsQGC app, it may take 20-30 seconds for the program
to finish loading operational parameters from the aircraft.
7. The EchoSky Mobile handset may be charged with the included DC charger.
The EchoSky Mobile handset is built around a tablet that runs the Android operating
system. This, when connected to the internet, allows applications such as WattsQGC to
be used to its full potential. When connected to the internet, the WattsQGC application
is capable of updating itself to the latest firmware, as well as the ability to show satellite
imagery inside of the application.
In order to connect the EchoSky Mobile tablet to the internet, simply access the Settings
menu in the Android tablet by pressing the 6 dots icon on the main menu, navigate to WiFi,
find your network that you would like to connect to, and type in the network
password. It is highly recommended that you connect to a WiFi network to ensure
the best experience possible with PRISM and the EchoSky Mobile RPS.
7.11 CONNECTING THE ECHOSKY MOBILE TO A WiFi NETWORK