GB
OFF mode
:
Use this mode if the Heating or cooling installation needs to be turned OFF.
MILUX Chrono-thermostat will switch off the installation and then switch itself OFF (blank).
User programs are saved, time is kept running and battery consumption becomes very low.
Any key will wake up the MILUX. The
OK /
key displays the actual room temperature.
DANGER
:
I
N THIS MODE YOUR INSTALLATION CAN FREEZE
because MILUX thermostat is stopped.
Set CLOCK menu
:
Use this menu to adjust the MILUX clock to the actual time.
use
+
/
-
to
Press
use
+
/
-
to
Press
use
+
/
-
to
Press
adjust minutes
OK
adjust
hours
OK
adjust
days
OK
PROGRAM menu
:
By pressing
+
or
-
key the Program number start to blink,
and use
W
X
to see the
then
use
+
/
-
to
other days in the program
select
program
Shows the daily program
If you select a built-in program
to
and press
OK
this program will be followed in
If you select an user program
to
and press
OK
you will enter the USER PROGRAM EDITION.
USER PROGRAM EDITION
:
Current blinking cursor position hour
The
+
key sets
temperature at the current blinking program hour
The
-
key sets temperature at the current blinking program hour
Use
W
X
keys to slide the blinking cursor position in the day and modify or correct easily the program
When the displayed day is correct press
OK
to advance to the following day. When you press
OK
on the
last day you will exit the User program edition and return to the top menu.
Now your user program will be followed if you put the MILUX in automatic operating mode
.
S
PECIAL FUNCTIONS
Holiday / Keypad lock / Reset functions
HOLIDAY Function :
only
in comfort mode,
reduced mode or
anti-freeze mode
Use
+
or
-
keys to adjust the required set temperature. Then press
OK
to enter and adjust the Holiday period.
When the is blinking you can select with
+
or
-
keys the number of hours
or number of days
before the MILUX automatically returns into automatic operating mode
and continues to follow the program.
KEYPAD LOCK Function :
function to prevent children from playing and changing the MILUX parameters
In
,
,
,
and
operating modes you can maintain the
OK
key pressed and
press simultaneously on the
+
or
-
key to lock (
) or un-lock (
) the keypad.
RESET Function :
Erases all user programs and sets the MILUX parameters to factory defaults
Go to
OFF mode, maintain
+
and
–
keys pressed and press simultaneously on the
OK
key. All the segments will lit
up during a few seconds showing that the MILUX have been erased and restarted with factory defaults parameters.
Defaults parameters are :
21°C
17°C
6°C
all comfort
HOT operation
Then re-adjust the time and follow the Q
UICK
S
TART
instruction on the previous page.
