CommLink IV Technical Guide
13
Operator Interface
6.
Double-click
in the Port location on the same line as
the job name. The
PortCtl Class Properties Window
will pop up.
7.
Click
on the down arrow on the Port pull down box
and
select
the COM port number that the CommLink
IV is using. This port number is the one you should
have found in the Device Manager (XP) or during
installation (Vista).
Click
<Apply>
and then click
<OK>
.
8. In the
Job Site Window’s
Baud Rate fi eld,
type
in the
baud rate 19200 and press
<Enter>
.
9. If you are using a single loop CommLink,
type
a “1”
in the CommLink fi eld in the
Job Site Window
and
press
<Enter>
. For all other confi gurations, leave “0”
in the fi eld.
10.
Click
<Done>
.
11.
Click
<Communications>
again and
select
<Go
OnLine>
.
Prism Set Up Instructions
Prism Set Up
1.
Open
your Prism software.
2.
Click
on the
<Key>
button and
type in
your level 3 passcode (default “sm”).
Click
<Done>
.
3. If Prism is online,
click
<Communications>
and
then
click
<Go Offl ine>
.
4.
Click
on the
<Edit Jobsite>
button to enter
jobsite information.
5.
Click
on an empty location.
Type in
a job name and
press
<Enter>
.
