WATTECO BoB Assistant, Справочное руководство

Страница: 20 / 57

Bob Assistant - Reference Manual
2023-04-04 - Version 1.0 20
2.2.3. Knowledge data set erase
In case you want to reset BoB ASSISTANT knowledge, it is possible to use the button to do so.
Pushing the button for more than 20s, will display the
“poweroff” green/orange/red sequence on the
LED, followed by pink Led after 20s. Once the LED is pink, you can release the button, the device will erase
the knowledge data stored in flash, and go off after sending a STATE message.
Turn BoB ASSISTANT OFF
(green->orange->red)
→
Press the button for ~1s
→
Press the button for ~4s
→
Press the button for ~10s
→
Press the button for more than 20s
Release the button when the LED is pink
The device will then display 5x sequence
BoB ASSISTANT will then send the STATE message to warn that it erased the
knowledge data and gets Off ( can take up to 10 minutes )