WATTECO BoB Assistant, Справочное руководство

Страница: 19 / 57

Bob Assistant - Reference Manual
2023-04-04 - Version 1.0 19
2.2.2. Device power off
In case you need to stop BoB ASSISTANT (e.g. maintenance operation), it is possible to turn BoB
ASSISTANT off, without loosing the data set (knowledge) learnt during the first 7 days.
To do so, push the button for ~10s, after you get the green/orange/red sequence on the LED. Once the
LED is red, you can release the button, the device will go off after sending a STATE message.
Turn BoB ASSISTANT OFF
(green->orange->red)
→
Press the button for ~1s
→
Press the button for ~4s
→
Press the button for ~10s
Release the button when the LED is red
BoB ASSISTANT will then send the STATE message to warn that it gets Off ( can
take up to 10 minutes )
Once the STATE message is sent, the LED will show the following
sequence:
To turn BoB Assistant back on, follow the steps described in §2.2.1.1 Turning BoB ASSISTANT ON