Wattbike ATOM, Руководство пользователя, Страница: 12 / 20

12
0 6
C A R E , M A I N T E N A N C E
A N D S T O R A G E
F I R M W A R E U P D A T E S
From time to time we issue firmware updates to keep the smart wireless
electronics inside the Atom up-to-date.
When a firmware update is issued, a firmware request will show on screen when
you next connect your device to your Atom.
TIP: This requires both internet connection and the latest version of the Wattbike
Hub to be installed on your device.
1. Ensure you have the latest app from the iOS App Store or Android Play Store.
2. Go to ‘just ride’.
3. Connect to your Atom as if you were starting a ride.
4. Follow the on-screen instructions to update.
TIP: Remember to restart the Atom, turning it off and then on using the switch at
the rear. You should also restart your device.
R E P L A C I N G S H I F T E R S
If your shifters have permanently malfunctioned and you need to replace them
then contact Wattbike Customer Services to order a replacement shifter.
Shifters are either Left or Right handed; they are not interchangeable. Once you
have your replacement shifter follow the steps below to replace them.
1. Pull back and remove the rubber hood on the shifter
2. Undo the Allen headed bolt securing the shifter to the shifter mount and
remove the shifter
3. Attach the new shifter and screw in the securing bolt
4. Open the Wattbike Hub that you have used with the bike before:
For iOS devices:
1. Navigate to Settings > Known Wattbikes
2. Select your bike from the list (you must have connected to the bike
previously).
3. After a few seconds the app will connect to the bike and the connection
circle will go green and an advanced settings button will appear
4. Tap ‘advanced settings’.
5. Tap the ‘pair’ button under the shifter you want to change and
immediately hold all three shifter buttons until you see the new shifter
details appear (5-10 seconds).
6. Your new shifter has now paired with your Atom
7. Test the shifter by going into a ‘just ride’ mode and pressing the buttons
On Android devices:
1. Click the ‘three dots’ menu item in the top right corner and select
‘known Wattbikes’.
2. Select your bike from the list (you must have connected to the
bike previously).
3. After a few seconds the app will connect to the bike and the circle
will go green.