WattAge Mirage 2000-5 Скачать руководство пользователя страница 3

Ä

SUGGESTION

Ã

 To avoid scratching your new airplane, do not unwrap the pieces until they are needed

for assembly. Cover your workbench with an old towel or brown paper, both to protect the aircraft and to
protect the table.  Keep a couple of jars or bowls handy to hold the small parts after you open the bags.

Ä

NOTE

Ã

 Please trial fit all the parts.  Make sure you have the correct parts and that they fit and are

aligned properly before gluing!  This will assure proper assembly.  Since the Mirage is, in part, hand made,
every airplane is unique and minor adjustments may have to be made.  However, you should find the fit
superior and assembly simple.

If you should find a part missing or have questions about assembly, please call or write to the address below:

Customer Service Center

18480 Bandilier Circle

Fountain Valley, CA.  92728

Phone: (714) 963-0329

Fax: (714) 964-6236

E-Mail: [email protected]

Wattage guarantees this kit to be free from defects in both material and workmanship, at the date of purchase.  This
does not cover any components/parts damaged by use, misuse or modification.  In no case shall Wattage's liability
exceed the original cost of the purchased kit.

In that Wattage has no control over the final assembly or material used for final assembly, no liability shall be as-
sumed for any damage resulting from the use by the user of the final user-assembled product.  By the act of using the
final user-assembled product, the user accepts all resulting liability.

Kit Contents

Fuselage

Left Wing

Right Wing

Vertical Stabilizer

Sticker Sheet

Va c u u m   Fo r m e d   P l a s t i c
Modled Parts Sheet

Photo 1

Photo 2

Photo 3

Photo 1

o

) Fuselage

o

) Right Wing Half

o

) Left Wing Half

o

) Vertical Stabilizer

Photo 2

o

) Sticker Sheet

o

) Vacuum Form

o

) Molded Parts

(canopy, etc.)

Photo 3
A) 
Plug Set
B) Motor with leads
and capacitors
C) Wood Motor
Mount Plate

D) 3mm Washers (2)
E) 3mm Motor Mounting
Screws (2)
F) Prop adaptor
G) Prop Nut
H) Prop Washer (2)
I) Threaded Rod (2)
J) Nylon Clevis (2)
K) Control Horn Assem-
bly (2)
L) Wood Screw Plates
(6)
M) Wood Screws (6)
K) Two Sided Mounting
Tape.

A)

B)

C)

D)

E)

F)

G)

H)

I)

I)

J)

J)

K)

L)

M)

K)

K)

3

Содержание Mirage 2000-5













Отзывы: