6
Visit our website at http://watt-age.globalhobby.com or for Customer Service at http://globalservices.globalhobby.com
We have organized the parts as they come out of the box for easier identification during assembly. Before you begin
assembly, group the parts as we list them below. This will ensure that you have all of the parts before you begin assembly
and it will also help you become familiar with each part.
AIRFRAME ASSEMBLIES
❑
(1)
Right & Left Wing Panels
❑
(2)
Ailerons
❑
(2)
Wing Tip Fences
❑
(1)
Plastic Hatch Cover
❑
(1)
Plastic Hand-Launch Fairing
❑
(1)
380 Direct Drive Motor
❑
(1)
5 x 2.5 Nylon Propeller
❑
(1)
Propeller Adapter w/Washer, Nut & Grub Screw
❑
(1)
Fiberglass Motor Plate
❑
(3)
Plywood Motor Rails (2 Long & 1 Short)
❑
(2)
Nylon Zip-Ties
❑
(2)
M1.5 x 150mm Threaded Wires
❑
(2)
Nylon Control Horns
❑
(2)
Nylon Control Horn Backplates
❑
(2)
Nylon Clevises
❑
(2)
Fiberglass Dowels (Long)
❑
(1)
Fiberglass Dowel (Short)
❑
(2)
White Plastic Reinforcement Tape (Optional)
❑
(1)
Double-Sided Foam Tape
❑
(1)
Velcro
®
Mounting Material
❑
(1)
White Plastic Mounting Board (2 Parts)
❑
(2)
M2 x 10mm Flange-Head Wood Screws
❑
(1)
Self-Adhesive Decal "Skins" Set
To convert inches into millimeters: Inches x 25.4 = mm
To convert millimeters into inches: Millimeters / 25.4 = in
Global Services
18480 Bandilier Circle
Fountain Valley CA 92708
Phone: (714) 963-0329 Fax: (714) 964-6236 Email: [email protected]
On the Web
http://globalservices.globalhobby.com
If you find any parts missing or damaged, please contact us at:
✦
✦
✦
✦
✦
WARNING
✦
✦
✦
✦
✦
The Hyper Wing 400 EP is constructed of foam. It is very important that you use no solvents, Cyanoacrylate (C/A)
glue, or paint that can damage foam. If any of these chemicals comes in contact with the foam parts, the parts will be destroyed and
will not be covered under warranty. Use only epoxy to glue the foam parts together. If you decide to add painted details to the
airplane, use acrylic-based paints and always test the paint on a scrap piece first.
We do not suggest storing your airplane in an extremely hot environment (like the back of your car in direct sunlight) for any length
of time. The extreme heat could cause the foam to melt and/or damage the covering material, and could possibly damage the fragile
components of the radio system, ESC or batteries.
Wattage stocks a complete line of replacement parts for your Hyper Wing 400 EP. Replacement parts can be purchased through
your local Wattage dealer or directly from us. Please refer to page # 22 for ordering information and a complete replacement
parts list.
MISCELLANEOUS PARTS
CONTROL SYSTEM ASSEMBLIES
MOTOR ASSEMBLY
SECTION 3: KIT CONTENTS
INFORMATION ABOUT PURCHASING REPLACEMENT PARTS
