8
❑
Push the front of the top deck down and align it with
the front of the fuselage and the fuselage sides.
❑
Secure the top deck into place by installing and
tightening two long wood screws through the predrilled
holes in the top deck.
IMPORTANT
If, after tightening the screws, there is a gap between the top deck and fuselage, remove the top deck and
peel away the protective backing from the strips of double-sided tape on the bottom of the top deck and the top of the
fuselage. Now, when you reinstall the top deck, the double-sided tape will hold the top deck down very securely. If you
should ever need to remove the wing, simply use a modeling knife to cut down the seam before removing the top deck.
❑
Carefully remove the protective backing from the strips
of double-sided tape on the bottom of the canopy.
❑
Align the canopy with the top deck and gently push it
into place. The double-sided tape will hold it securely.
Step 7: Installing the Propeller
❑
Push the propeller firmly onto the motor shaft.
IMPORTANT
The propeller should be pushed on firmly,
but the back of the foam spinner should not rub against
the front of the fuselage.
