6
❑
Slide the plastic landing gear retainer into the slot and
push it down firmly.
❑
Install and tighten the small wood screw to secure the
landing gear retainer into place.
❑
To hold the vertical tail in place, thread the short wood
screw into the predrilled hole in one side of the plastic
mount, through the vertical tail, and into the predrilled hole
in the opposite side of the plastic mount.
☞
Do not overtighten the screw or you might strip the
plastic mount.
Step 4: Installing the Landing Gear
❑
Push the landing gear wire firmly down into the slot in
the bottom of the fuselage.
