14
❑
Looking from the back of the Electric Cub, move
the left-hand transmitter control stick completely forward.
The horizontal control surface should move down.
Step 2: Testing the Motor
❑
Turn on the transmitter and plug in and install the
flight battery.
❑
Make sure that the motor on/off switch is pulled back
toward you - see page # 10.
❑
While keeping clear of the propeller, press the red
motor safety arming switch once.
WARNING:
During the motor test keep everything clear
of the propeller, especially fingers and loose clothing.
❑
While holding the Electric Cub upright in the air
with
the propeller pointing away from you
, push the motor
on/off switch forward. The propeller should spin at a high
rate of speed.
❑
When finished with the test, pull the motor on/off
switch toward you (the motor should turn off), unplug the
flight battery, then turn off the transmitter.
