10
Step 7: Installing the Flight Battery
❑
Pull the motor on/off switch back toward you to make
sure the motor is in the off position.
❑
Turn on the transmitter. Both the green and the red
LED's should light up.
IMPORTANT
Always make sure you turn on the transmitter first,
before installing the flight battery. After you're done
flying, remove the flight battery first, then turn off the
transmitter.
☛
This will prevent unexpected radio signals from in-
terfering with your radio system.
❑
Remove the rubber bands, wing brace and wing from
the fuselage. Set them aside.
❑
Plug the connector on the flight battery into the
connector that is inside the fuselage. When plugged in
properly you should hear the connectors "click".
☛
Note that the plugs can be plugged in only one way.
Continued on Next Page
