Watt Stopper EW-105-24, Руководство по установке

Страница: 7 / 12

WIRING AND INSTALLATION (continued)
Connecting to a Power Pack
Wire the sensor to a Watt Stopper
power pack as shown:
• RED wire from sensor to RED
wire on power pack.
• BLACK (common) wire from
sensor to BLACK wire on power
pack.
• BLUE wire from sensor to
BLUE wire on power pack.
6
Call 800.879.8585 or 972.578.1699 For Technical Support
EW Sensor
Lighting
Load
White (Neutral)
Red (Load)
Red (Line)
White
Black
Hot
N
Power
Pack
Red Black Blue
Switch
(BLU) Control Output 24VDC
(BLK) Control Return
(RED) +24VDC
Connecting to a DM-105-WP
HID Dimming Module
Wire the sensor to a Watt Stopper
DM-105-WP as shown below:
• RED wire from sensor to RED
wire from the DM-105-WP
cable.
• BLACK (common) wire from
sensor to BLACK wire from the
DM-105-WP cable.
• BLUE wire from sensor to
WHITE wire from the
DM-105-WP cable.
Control Output from Sensor (Blue)
Common (Black)
+24 VDC to Sensor (Red)
DM-105-WP
EW-105-24 or EW-205-24
Motion Sensor
Ballast
Red Black White
Connecting to a DM-105 HID Dimming Module
Wire the sensor to a Watt Stopper DM-105 as shown below:
1. RED wire from sensor to terminal 1 (+24VDC Output) on the
DM-105.
2. BLACK wire (common) from sensor to terminal 2 on the DM-105.
3. BLUE wire from sensor terminal 3 (Control In) on the DM-105.
Control Output from Sensor (Blue)
Common (Black)
+24 VDC to Sensor (Red)
EW-105-24 or EW-205-24
Motion Sensor
1
5
4
3
2
CONTROL OUTPUT
CONTROL IN #2
+24VDC OUTPUT
RETURN (COMMON)
CONTROL IN #1
5
1
2
3
4
DM-105
Terminals