HOW TO CHANGE THE BOTTLE
1.Open the front door
5. Place the wand
handle down, insert the
wand into the bottle.
6. Pull up the wand handle,
make sure that it locked the
bottle, and take the bottle on
the dispenser bottom platform.
4. Remove the bottle
cap of the new bottle.
8. Close the door, water
will fill in automatically.
3. Take out the wand from the
top of the bottle.
Attention:The wand handle
should be placed down to take
out the wand.
7. Put down the wand
handle, and slide into the
dispenser.
Attention: When the bottle is empty , the dispenser will have a sucking sound and the LED light will twinking. If
the bottle can not be replaced rapidly, please open the front door to stop all alarms.
STABILITY ANCHOR INSTALLATION
Parts
Quantity
2
2
2
Stability Anchor
Fixing Screw
Installation
:
1
、
please remove the screws from the lower corners of the
dispenser
2
、
Fix the stability anchors on the back of the dispenser
3
、
Flooring drilling, place the water dispenser places the rubber
plug inserted into the hole
4
、
Fix the dispenser on level ground on table . Keep the
dispenser at least 10 cm away from wall
NOTE: The machine chassis containing mounting screw holes and
the L-shaped feet accessories
Screw nut Gasket
Stability Anchor
Cross recessed pan head stud
Cross recessed pan head
self-tapping screws
II
2 : 5
The plastic expansion snails tube
The plastic expansion
snails tube
2. Pull out the empty
bottle with the bottle
handle.
II
≥ 4
"
≥ 4
"
≥ 4
"
12.6
"
15
"
4.96
"
1.4
"
≥ 4"
WARNING: To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.