26246 Twelve Trees Lane NW, Poulsbo, Washington 98370
800.426.1202 watsonfurniture.com [email protected]
CARE + MAINTENANCE
• Caustic solutions containing greater than 2% lye,
such as Drano®
• Sodium bisulfate, such as Sani-Flush®
• Potassium permanganate
• Berry juices
• Silver nitrate, in 1% concentration or greater
• Gentian violet
• Mild silver protein, such as 20% Argyrol
• Bluing
• Fabric dye, such as Tintex® or Rit®
• Alcohol containing 1% iodine in solution
Fabric Panels
Fabric may be cleaned with mild, water-free solvents or
water-based cleaning agents or foam. For tough stains, we
recommend Shout® wipes as an effective cleaner.
WARNING!
Always rinse laminate surfaces after cleaning. Cleaning
solutions may leave behind a residue that can be
reactivated by moisture from cups or drinks. Prolonged
exposure to cleaning residues can cause permanent
discoloration, scars, or stains in laminate surfaces.
CAUTION
For normal cleaning, vacuum panel fabric as needed,
using an upholstery attachment. Do not brush fabric or
use a vacuum attachment with a rotary brush. Brushing
may permanently damage the nap or change the
character of the fabric.
Surface & Case
Laminate
To clean the surface, use mild soap or detergent with
a damp cloth or sponge. Difficult stains such as coffee
or tea can be removed by using mild household cleaner
and baking soda; mixing to achieve a paste consistency.
Gently wash (approximately 15-20 strokes) the affected
area using a stiff nylon bristle brush. Do not scrub so as to
scratch the surface finish. Avoid cleaners with ammonia.
Marker Board Laminate
Wilsonart Marker Board Laminate can be cleaned using
a felt or multi-purpose board eraser. When additional
cleaning is required, a soft cloth dampened with warm
tap water and mild soaps, such as those used for hands
or dishes, is recommended. Remember to clean erasers
often by wiping to remove dry-erase marker residue.
Stubborn Stains
Stubborn stains that resist any of the mentioned cleaning
methods may require the use of undiluted household
bleach or nail polish remover. Use a cotton ball saturated
with bleach or nail polish remover (acetone), gently rub
the stain for up to two minutes. Rinse thoroughly with
warm water and wipe dry with a soft cloth. This step may
be repeated if the stain appears to be going away and the
color of the laminate has not been affected.
Note — Scrubbing too hard or at length can damage the
surface finish.
If stubborn stains persist, Marker Board Laminate can be
cleaned with spray-type glass cleaners, such as Windex®.
Do not use cleansers that contain abrasives, acids or
alkalis; they will damage the surface. Remove stubborn
stains with a 2-minute exposure to hypochlorite bleach,
such as Clorox®, followed by a clean water rinse.
We recommend that you not allow any of the following
reagents to remain in contact with the laminate:
• Hypochlorite bleach, except as described in
this manual
• Hydrogen peroxide solution
• Mineral acids, hydrochloric acid, such as Lime-A-
Way™, sulfuric or nitric acid
TNC USER GUIDE | 2
Содержание Tonic Bench
Страница 1: ...USER GUIDE Tonic Bench...